尼龍樹脂全塑管
尼龍樹脂全塑管（代號：PA）材質：尼龍樹脂（PA6、PA11、PA12）用途：空氣管、潤滑管、螺旋管、護線管
簡介：尼龍樹脂管是由日本宇部進口的PA-12制成，內壁光滑，液體阻力小，液壓損失少，液體流暢，無生銹，無結垢現(xiàn)象。能耐多種化學物質的腐蝕，滲透率極小，它的拉伸和彎曲有極大的穩(wěn)定性，能在-40°--120°溫度范圍內使用而保持柔性，正常工作。
| 規(guī)格 | 外徑mm | 內徑mm | 壁厚mm | 公差mm | zui小彎曲半徑mm | 工作壓力Mpa | 爆破壓力Mpa |
|
| PA-3 | 3 | 2 | 0.5 | ±0.1 | 20 | 2.0 | 8 |
|
| PA-4 | 4 | 3 | 0.5 | ±0.1 | 20 | 2.0 | 5.7 |
|
| PA-4 | 4 | 2.5 | 0.75 | ±0.1 | 20 | 2.0 | 7.8 |
|
| PA-5 | 5 | 3 | 1 | ±0.1 | 25 | 2.0 | 10.2 |
|
| PA-6 | 6 | 4 | 1 | ±0.1 | 40 | 2.0 | 8.1 |
|
| PA-8 | 8 | 6 | 1 | ±0.1 | 50 | 2.0 | 5.7 |
|
| PA-8 | 8 | 5 | 1.5 | ±0.1 | 50 | 2.0 | 9.3 |
|
| PA-10 | 10 | 8 | 1 | ±0.15 | 65 | 2.0 | 4.5 |
|
| PA-10 | 10 | 7 | 1.5 | ±0.15 | 65 | 1.5 | 7.1 |
|
| PA-12 | 12 | 10 | 1 | ±0.15 | 65 | 1.5 | 3.6 |
|
| PA-12 | 12 | 9 | 1.5 | ±0.15 | 70 | 1.5 | 5.7 |
|
| PA-12.5 | 12.5 | 10 | 1.25 | ±0.15 | 70 | 1.5 | 4.5 |
|
| PA-14 | 14 | 11 | 1.5 | ±0.15 | 80 | 1.5 | 4.8 |
|
| PA-14 | 14 | 10 | 2 | ±0.15 | 80 | 1.5 | 6.7 |
|
| PA-16 | 16 | 13 | 1.5 | ±0.2 | 130 | 1.5 | 4.0 |
|
| PA-16 | 16 | 12 | 2 | ±0.2 | 130 | 1.5 | 5.7 |
|
| PA-18 | 18 | 15 | 1.5 | ±0.2 | 150 | 1.0 | 3.6 |
|
| PA-18 | 18 | 14 | 2 | ±0.2 | 150 | 1.0 | 5.1 |
|
| PA-19 | 19 | 16 | 1.5 | ±0.2 | 200 | 1.0 | 3.3 |
|
| PA-19 | 19 | 15 | 2 | ±0.2 | 200 | 1.0 | 4.3 |
|
